How to Connect a Switch Controller: Joy-Con, Pro Controller, and More

Written by: Editor In Chief
Published on:

To connect a Switch controller, pair it from the console’s Controllers menu or attach compatible Joy-Con directly to the system.

The right method depends on whether you have Joy-Con, a Nintendo Switch Pro Controller, a Switch Lite, or a wired third-party controller.

Connect a Joy-Con to a Nintendo Switch

On a standard Nintendo Switch or Nintendo Switch OLED, the quickest way to connect Joy-Con is to slide each controller onto the matching rail on the sides of the console.

Push each Joy-Con down until it clicks into place.

The console registers attached controllers automatically, and you can use them while the system is docked or undocked.

To use Joy-Con wirelessly after detaching them, press a button on each controller.

If they do not reconnect, open the HOME Menu and select Controllers, then Change Grip/Order.

Press and hold the small SYNC button on the rail of the Joy-Con until its player lights begin to flash.

When the controller appears, set its orientation: press L and R for a pair held together, or press SL and SR if you will use one Joy-Con sideways.

Finish by pressing A.

Nintendo’s Joy-Con setup guide also explains registration for Switch Lite.

A Lite has no side rails, so Joy-Con must be paired wirelessly and used separately; it does not have built-in kickstand play for detached controllers.

To play tabletop-style, use a compatible stand, and keep the Joy-Con charged with an appropriate charging accessory.

Pair a Nintendo Switch Pro Controller wirelessly

  1. Turn on the Switch and open the HOME Menu.
  2. Select Controllers, then choose Change Grip/Order.
  3. Press and hold the Pro Controller’s SYNC button, located along its top edge near the USB-C port, until the player LEDs start flashing.
  4. Wait for the controller to register, then press A to confirm and return to the game.

If the Pro Controller was paired with another console, pairing it to this Switch registers it to the current system.

You may need to pair it again when switching consoles.

The official Nintendo Switch Pro Controller support page covers controller preparation and connection options.

Connect a Switch Pro Controller with a USB cable

For a wired connection, place the Switch in its dock and connect the Pro Controller to one of the dock’s USB ports with a suitable USB charging cable.

Then wake the console and press a button on the controller.

The dock provides the USB connection; plugging a controller into an ordinary phone charger only charges it and does not connect it to the Switch.

On some systems, the Pro Controller may need the wired communication setting enabled.

From the HOME Menu, open System Settings, select Controllers and Sensors, and turn on Pro Controller Wired Communication.

Menu labels can vary slightly with system language or software updates.

When enabled, the controller communicates through the cable while connected.

Nintendo’s Switch system update information describes this wired communication option.

A Switch Lite has no dock or USB-A ports.

For a Lite, use wireless pairing for a Pro Controller, or connect a compatible USB controller through an appropriate adapter only if the accessory’s maker confirms Switch Lite support.

Compatibility varies by controller and adapter.

Connect a wired or third-party controller

For a licensed wired controller with a USB plug, connect it to a USB port on the Switch dock, then follow any pairing or mode instructions included with the controller.

Some wired controllers need no pairing, while others have a mode switch, player-number button, or special setup step.

Check the manufacturer’s instructions if the console does not recognize it.

Wireless third-party controllers may require a USB receiver, a specific pairing mode, or a system setting.

Do not assume a controller designed for another console will pair directly over Bluetooth: support depends on the controller and its firmware.

Look for explicit Nintendo Switch compatibility in the accessory documentation.

Connect controllers for multiplayer

After the first controller is connected, open Controllers and select Change Grip/Order to register additional controllers and set their orientation.

For a Joy-Con pair, press L and R on each controller as prompted.

For one Joy-Con per player, hold it sideways and press SL and SR.

The player lights show the assigned controller number.

The number of people who can play depends on the game and mode, even when the console can connect more controllers.

Check the game’s player information before connecting a group.

Some games require a full pair of Joy-Con or a Pro Controller for each player, while others support one sideways Joy-Con per person.

Troubleshoot a Switch controller that will not connect

  • Charge it first. A low battery can prevent pairing or cause the controller to disconnect.

    Attach Joy-Con to the console or connect a Pro Controller to a power source, then try again.

  • Use the SYNC button briefly. Pressing SYNC once can interrupt an existing connection; press a face button afterward to reconnect.

    If the controller is not registered, return to Change Grip/Order and hold SYNC until the player lights flash.

  • Move closer to the console. Keep the controller in clear range and away from likely sources of wireless interference, such as crowded wireless devices or metal barriers.
  • Restart the connection flow. Press HOME on a connected controller, reopen Controllers, and select Change Grip/Order.

    If another controller is occupying the player slot, disconnect it or finish the on-screen setup before pairing again.

  • Check the USB path. For a wired Pro Controller, confirm the cable supports data as well as charging, connect it to the dock, and enable wired communication if needed.

    Try another dock USB port or a known-compatible cable.

  • Update the console. Open System Settings and choose System > System Update.

    Then check Controllers and Sensors for a controller update option when available.

If only one Joy-Con fails to register, make sure you are holding the correct SYNC button and that the controller is charged.

For a Switch Lite, select Controllers > Change Grip/Order, then hold SYNC on the Joy-Con; when it appears, choose the correct grip and press A.

If a controller still does not work after charging, updating, and repeating the pairing steps, test it with another compatible Switch when possible or contact Nintendo support or the controller manufacturer.

Check the controller’s player lights and grip

When pairing succeeds, the small player indicator lights show which controller number the console assigned.

If the lights keep cycling, the Switch is still searching for a connection; if they stop on one number, the controller has registered.

A sideways Joy-Con should show a single assigned player position, while a pair used together should be recognized as one controller.

Reopen Change Grip/Order if the game displays the wrong number of players or the buttons behave as though the controller is sideways.

Confirm the game supports your controller setup

A controller can be connected to the console and still be unavailable for a particular game or mode.

Before troubleshooting further, check the game’s packaging, Nintendo eShop listing, or in-game controller instructions for supported controller types and player counts.

Motion controls, HD Rumble, or other features can also vary by game.

If the game asks players to join, use its displayed prompt after setting the grip in the HOME Menu; pairing alone may not add everyone to the game session.

When a controller connects but buttons do not respond

First return to the HOME Menu and confirm the controller can navigate it.

If it works there but not in the game, close and reopen the game or review that game’s control setup.

If it does not respond in the HOME Menu, disconnect and pair it again.

You can also check System Settings > Controllers and Sensors for button mapping or calibration options, where available.

A remapped button layout can make a working controller seem unresponsive, especially when testing only one button.

If only one Joy-Con fails to register, make sure you are holding the correct SYNC button and that the controller is charged.

For a Switch Lite, select Controllers > Change Grip/Order, then hold SYNC on the Joy-Con; when it appears, choose the correct grip and press A.

If a controller still does not work after charging, updating, and repeating the pairing steps, test it with another compatible Switch when possible or contact Nintendo support or the controller manufacturer.