How to Make a Nether Portal in Minecraft: Materials, Steps, and Fixes

Written by: Editor In Chief
Published on:

To make a Nether portal in Minecraft, build a vertical frame from obsidian and ignite its open center with flint and steel.

The basic frame is simple, but a few details about its size, materials, and surroundings can save you a wasted trip back to the mine.

What you need to make a Nether portal

You need obsidian for the frame and a way to create fire inside it.

The usual tool is flint and steel, crafted from one iron ingot and one flint.

Flint drops when you mine gravel, though it may take more than one block.

An alternative is a fire charge, which can also ignite the portal.

  • 10 obsidian for the smallest usable frame, if you leave out the four corner blocks.
  • 14 obsidian for a complete rectangular frame with all four corners.
  • Flint and steel or another way to start a fire in the opening.
  • A diamond or netherite pickaxe if you plan to mine obsidian yourself.

Obsidian takes time to mine and requires a diamond or netherite pickaxe to drop as a collectible block.

If you do not have one, you can sometimes build a frame by placing water against lava source blocks, using a bucket to form obsidian in place.

Take care around lava: secure the area and avoid standing where flowing lava can reach you.

Minecraft’s official guide to visiting the Nether describes the basic obsidian frame and lighting process.

A Nether portal does not require a diamond pickaxe if you already have the obsidian blocks; the pickaxe is only needed to mine obsidian normally.

How to build a Nether portal step by step

1. Choose a safe, open location

Build on a stable surface with enough room to stand in front of the frame.

In the Overworld, keep the entrance clear of grass, wooden blocks, and other flammable materials.

A portal can be built indoors, but leave space around it so you can enter and exit without getting trapped or catching nearby blocks on fire.

2. Make the rectangular obsidian frame

The smallest frame has an opening two blocks wide and three blocks high.

Place two obsidian blocks along the bottom and two along the top, then add three blocks on each side.

This uses 10 obsidian because the four corners are optional.

If you prefer a solid rectangle, add one obsidian block to each corner for a total of 14.

For a quick layout, think of the frame as a doorway: the left and right sides are three blocks tall, while the top and bottom span four blocks from outer edge to outer edge.

The space inside must remain empty and measure two blocks wide by three blocks high.

Do not place obsidian across the center.

3. Ignite the inside of the frame

Stand near the opening and use flint and steel on an interior block or the floor space inside the frame.

Controls vary by platform: on a computer, this usually means right-clicking; on a controller or touchscreen, use the appropriate interact or use-item control.

If the frame is valid, the empty center fills with a purple, animated portal surface.

4. Enter and wait for the transfer

Walk into the purple field and remain inside for a few seconds until the screen effect completes.

If you are playing in Creative mode, the transfer may happen immediately.

In Survival, avoid stepping into the portal by accident while fighting or building nearby, and make sure the exit area on the other side is safe before carrying valuable equipment.

Can you make a portal without mining 10 obsidian?

Yes.

You can make obsidian in place by pouring water over lava source blocks, then arranging the blocks into the portal frame.

This approach is useful before you have a diamond pickaxe, but it requires careful bucket placement and access to both water and lava.

Pouring water onto flowing lava generally creates cobblestone rather than obsidian, so target lava source blocks.

You can also search for a ruined portal in the Overworld.

These structures contain a damaged obsidian frame, but they may include crying obsidian, which cannot form part of an active Nether portal frame.

Remove any crying obsidian and replace it with regular obsidian; complete the missing sides, then ignite the opening.

Ruined portals can reduce the amount of obsidian you need to gather, but check the structure before assuming it is ready to use.

Why will my Nether portal not light?

If the frame stays dark after you try to ignite it, check these common causes:

  • The frame contains the wrong block. Every block forming the active frame must be regular obsidian.

    Crying obsidian and decorative blocks do not work as substitutes.

  • The opening is the wrong size. Use an interior space two blocks wide and at least three blocks high, surrounded by a valid obsidian frame.

    The minimum standard frame is four blocks wide and five blocks tall overall.

  • A block is obstructing the opening. Remove blocks, water, or other obstructions from the space that should become the portal surface.
  • The ignition landed outside the frame. Use flint and steel on the floor or an interior surface within the opening.

    A fire beside the frame will not activate it.

  • You are trying to mine obsidian with an unsuitable tool. Mining without a diamond or netherite pickaxe will not collect the obsidian, even if the block breaks or disappears.
  • Your server or world settings restrict the Nether. In multiplayer, the server may have the Nether disabled or impose other restrictions.

    Ask the server administrator to check the world configuration.

After correcting a problem, use flint and steel again inside the opening.

If the purple surface appears but entering it does not take you to the Nether, stand in the portal and wait for the transfer effect to finish.

On a server, lag or a disabled Nether dimension may delay or prevent the trip.

Do portal dimensions or versions change the steps?

The core method is the same in Minecraft: Java Edition and Bedrock Edition: make an obsidian frame, ignite the inside, and enter the portal.

Input controls differ across PC, console, and mobile, and multiplayer servers can change whether the Nether is available.

If a world uses add-ons, mods, or custom server settings, those changes can affect portal behavior.

The smallest frame is convenient, but portals can also be built larger for decorative entrances.

The functional opening must stay within the portal’s supported dimensions, and the frame must still be made from regular obsidian.

Keep a return route in mind: when you arrive, note the portal location and nearby landmarks so you can find the exit again.

Before you travel through

Check that you have enough food, armor, and a weapon for the Nether, and consider leaving your most valuable items in a chest until you know where the portal leads.

The destination can place you near hazards such as lava, hostile mobs, or cliffs.

If the new portal appears in a dangerous location, secure the area around it before exploring farther.

For a basic first build, place 10 regular obsidian blocks as a cornerless doorway, ignite the two-by-three opening with flint and steel, and enter only after checking that the frame and landing area are clear.